STANDARD UHMW ROLL SPECIFICATIONS
|
|
COLORS
|
STANDARD UHMW
ROLL LENGTH
|
STANDARD ROLL TOLERANCE
|
STANDARD THICKNESS TOLERANCE
|
| Natural and Black
(Conductive available in selected gauges). Custom colors can be produced
with a 400 lb. minimum.
|
Roll lengths
on tapes from 003" - .030" are available in standard 18 yd.(54") and
36 yd.(108") lengths. All other gauges come in standard 50" and 100"
coils. Other lengths are available by request.
|
+/- .030" on
width
(tighter tolerances are available by request) |
+/- 10%
(tighter tolerances are available by request) |
|
SPECIFICATIONS
& APPROVAL FOR USE OF
Ticona GUR UHMW Polymer
|
|
ASTM
|
D4020 UHMW-PE
|
Molding and Extrusion
Materials |
|
FDA
|
Ticona GUR is in
compliance with FDA regulations as listed in Federal Register under
the Food, Drug, and Cosmetic Act of 1958, as amended for food contact
use provided it is used unmodified and in accordance with good manufacturing
practices.
|
FEDERAL
L-P-390C
|
Plastic, Molding
and Extrusion Material, Polyethylene and Copolymers
(Low, Medium,
and High Density) |
| MILITARY |
MIL-B-17901 |
Bearing Components, Bonded
Synthetic Rubber, Water Lubricated |
| MIL-P-23536 |
Plastic Sheets, Virgin and
Borated Polyethylene |
|
NSF
|
To obtain NSF approval, a manufacturer must submit a unit which
contains Ticona GUR (e.g. a component in a refrigerator or drinking
fountain) |
|
OSHA
|
Ticona GUR is not considered hazardous as defined by the OSHA Hazard Communication Standard
29 CFR 1910.1200
|
|
UL
|
There is no current
listing for Ticona GUR. However, previous UL-94 testing resulted
in a V-2 rating for unmodified GUR and a V-0 rating with sufficient
flame retardant additives. Standard 29 CFR 1910.1200 |
|
USDA
|
Ticona GUR has a USDA approval for meat and poultry in food handling applications. Ticona GUR also has a 3A sanitary approval for dairy applications. |
|
- Material Safety Data Sheets (MSDS) Available on Request.
|
|
